x/gov

Technical specification for Nibiru Chain's governance module, x/gov. The module enables an on-chain governance system on the Nibiru network. In this system, holders of the native staking token of the chain can vote on proposals on a 1 token 1 vote basis.

Abstract

Governance activities include:

• Proposal submission: Users can submit proposals with a deposit. Once the minimum deposit is reached, the proposal enters voting period.
• Vote: Participants can vote on proposals that reached MinDeposit
• Inheritance and penalties: Delegators inherit their validator's vote if they don't vote themselves.
• Claiming deposit: Users that deposited on proposals can recover their deposits if the proposal was accepted or rejected. If the proposal was vetoed, or never entered voting period, the deposit is burned.

Contents

The following specification uses NIBI as the native staking token. The module can be adapted to any Proof-Of-Stake blockchain by replacing NIBI with the native staking token of the chain.

• x/gov
• Abstract
• Contents
• Concepts
  • Concepts: Proposal submission
  • Concepts: Deposit
  • Concepts: Vote
  • Concepts: Quorum
• State
  • State: Proposals
  • State: Parameters and base types
  • State: Deposit
  • State: ValidatorGovInfo
• Stores
• Messages
  • MsgSubmitProposal
  • MsgDeposit
  • MsgVote
• Events
• Parameters
• Client
  • CLI
    • Query
    • Transactions
  • gRPC
  • REST
• Metadata
• Future Improvements

Concepts

Disclaimer: This is work in progress. Mechanisms are susceptible to change.

The governance process is divided in a few steps that are outlined below:

• Proposal submission: Proposal is submitted to the blockchain with a deposit.
• Vote: Once deposit reaches a certain value (MinDeposit), proposal is confirmed and vote opens. Bonded Atom holders can then send TxGovVote transactions to vote on the proposal.
• Execution After a period of time, the votes are tallied and depending on the result, the messages in the proposal will be executed.

Concepts: Proposal submission

Right to submit a proposal

Every account can submit proposals by sending a MsgSubmitProposal transaction. Once a proposal is submitted, it is identified by its unique proposalID.

Proposal Messages

A proposal includes an array of sdk.Msgs which are executed automatically if the proposal passes. The messages are executed by the governance ModuleAccount itself. Modules such as x/upgrade, that want to allow certain messages to be executed by governance only should add a whitelist within the respective msg server, granting the governance module the right to execute the message once a quorum has been reached. The governance module uses the MsgServiceRouter to check that these messages are correctly constructed and have a respective path to execute on but do not perform a full validity check.

Concepts: Deposit

To prevent spam, proposals must be submitted with a deposit in the coins defined by the MinDeposit param.

When a proposal is submitted, it has to be accompanied with a deposit that must be strictly positive, but can be inferior to MinDeposit. The submitter doesn't need to pay for the entire deposit on their own. The newly created proposal is stored in an inactive proposal queue and stays there until its deposit passes the MinDeposit. Other token holders can increase the proposal's deposit by sending a Deposit transaction. If a proposal doesn't pass the MinDeposit before the deposit end time (the time when deposits are no longer accepted), the proposal will be destroyed: the proposal will be removed from state and the deposit will be burned (see x/gov EndBlocker). When a proposal deposit passes the MinDeposit threshold (even during the proposal submission) before the deposit end time, the proposal will be moved into the active proposal queue and the voting period will begin.

The deposit is kept in escrow and held by the governance ModuleAccount until the proposal is finalized (passed or rejected).

Deposit refund and burn

When a proposal is finalized, the coins from the deposit are either refunded or burned according to the final tally of the proposal:

• If the proposal is approved or rejected but not vetoed, each deposit will be automatically refunded to its respective depositor (transferred from the governance ModuleAccount).
• When the proposal is vetoed with greater than 1/3, deposits will be burned from the governance ModuleAccount and the proposal information along with its deposit information will be removed from state.
• All refunded or burned deposits are removed from the state. Events are issued when burning or refunding a deposit.

Concepts: Vote

Participants

Participants are users that have the right to vote on proposals. On the Cosmos Hub, participants are bonded Atom holders. Unbonded Atom holders and other users do not get the right to participate in governance. However, they can submit and deposit on proposals.

Note that when participants have bonded and unbonded Atoms, their voting power is calculated from their bonded Atom holdings only.

Voting period

Once a proposal reaches MinDeposit, it immediately enters Voting period. We define Voting period as the interval between the moment the vote opens and the moment the vote closes. Voting period should always be shorter than Unbonding period to prevent double voting. The initial value of Voting period is 2 weeks.

Option set

The option set of a proposal refers to the set of choices a participant can choose from when casting its vote.

The initial option set includes the following options:

• Yes
• No
• NoWithVeto
• Abstain

NoWithVeto counts as No but also adds a Veto vote. Abstain option allows voters to signal that they do not intend to vote in favor or against the proposal but accept the result of the vote.

Note: from the UI, for urgent proposals we should maybe add a ‘Not Urgent’ option that casts a NoWithVeto vote.

Weighted Votes

ADR-037 (opens new window) introduces the weighted vote feature which allows a staker to split their votes into several voting options. For example, it could use 70% of its voting power to vote Yes and 30% of its voting power to vote No.

Often times the entity owning that address might not be a single individual. For example, a company might have different stakeholders who want to vote differently, and so it makes sense to allow them to split their voting power. Currently, it is not possible for them to do "passthrough voting" and giving their users voting rights over their tokens. However, with this system, exchanges can poll their users for voting preferences, and then vote on-chain proportionally to the results of the poll.

To represent weighted vote on chain, we use the following Protobuf message.

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1beta1/gov.proto#L34-L47 Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1beta1/gov.proto#L181-L201

For a weighted vote to be valid, the options field must not contain duplicate vote options, and the sum of weights of all options must be equal to 1.

Concepts: Quorum

Quorum is defined as the minimum percentage of voting power that needs to be cast on a proposal for the result to be valid.

Threshold

Threshold is defined as the minimum proportion of Yes votes (excluding Abstain votes) for the proposal to be accepted.

Initially, the threshold is set at 50% of Yes votes, excluding Abstain votes. A possibility to veto exists if more than 1/3rd of all votes are NoWithVeto votes. Note, both of these values are derived from the TallyParams on-chain parameter, which is modifiable by governance. This means that proposals are accepted iff:

• There exist bonded tokens.
• Quorum has been achieved.
• The proportion of Abstain votes is inferior to 1/1.
• The proportion of NoWithVeto votes is inferior to 1/3, including Abstain votes.
• The proportion of Yes votes, excluding Abstain votes, at the end of the voting period is superior to 1/2.

Inheritance

If a delegator does not vote, it will inherit its validator vote.

• If the delegator votes before its validator, it will not inherit from the validator's vote.
• If the delegator votes after its validator, it will override its validator vote with its own. If the proposal is urgent, it is possible that the vote will close before delegators have a chance to react and override their validator's vote. This is not a problem, as proposals require more than 2/3rd of the total voting power to pass, when tallied at the end of the voting period. Because as little as 1/3 + 1 validation power could collude to censor transactions, non-collusion is already assumed for ranges exceeding this threshold.

Validator’s punishment for non-voting

At present, validators are not punished for failing to vote.

Governance address

Later, we may add permissioned keys that could only sign txs from certain modules. For the MVP, the Governance address will be the main validator address generated at account creation. This address corresponds to a different PrivKey than the CometBFT PrivKey which is responsible for signing consensus messages. Validators thus do not have to sign governance transactions with the sensitive CometBFT PrivKey.

Burnable Params

There are three parameters that define if the deposit of a proposal should be burned or returned to the depositors.

• BurnVoteVeto burns the proposal deposit if the proposal gets vetoed.
• BurnVoteQuorum burns the proposal deposit if the proposal deposit if the vote does not reach quorum.
• BurnProposalDepositPrevote burns the proposal deposit if it does not enter the voting phase.

Note: These parameters are modifiable via governance.

State

State: Proposals

Proposal objects are used to tally votes and generally track the proposal's state. They contain an array of arbitrary sdk.Msg's which the governance module will attempt to resolve and then execute if the proposal passes. Proposal's are identified by a unique id and contains a series of timestamps: submit_time, deposit_end_time, voting_start_time, voting_end_time which track the lifecycle of a proposal

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/gov.proto#L51-L99

A proposal will generally require more than just a set of messages to explain its purpose but need some greater justification and allow a means for interested participants to discuss and debate the proposal. In most cases, it is encouraged to have an off-chain system that supports the on-chain governance process. To accommodate for this, a proposal contains a special metadata field, a string, which can be used to add context to the proposal. The metadata field allows custom use for networks, however, it is expected that the field contains a URL or some form of CID using a system such as IPFS (opens new window). To support the case of interoperability across networks, the SDK recommends that the metadata represents the following JSON template:

Copy { "title": "...", "description": "...", "forum": "...", // a link to the discussion platform (i.e. Discord) "other": "..." // any extra data that doesn't correspond to the other fields }

This makes it far easier for clients to support multiple networks.

The metadata has a maximum length that is chosen by the app developer, and passed into the gov keeper as a config. The default maximum length in the SDK is 255 characters.

Writing a module that uses governance

There are many aspects of a chain, or of the individual modules that you may want to use governance to perform such as changing various parameters. This is very simple to do. First, write out your message types and MsgServer implementation. Add an authority field to the keeper which will be populated in the constructor with the governance module account: govKeeper.GetGovernanceAccount().GetAddress(). Then for the methods in the msg_server.go, perform a check on the message that the signer matches authority. This will prevent any user from executing that message.

State: Parameters and base types

Parameters define the rules according to which votes are run. There can only be one active parameter set at any given time. If governance wants to change a parameter set, either to modify a value or add/remove a parameter field, a new parameter set has to be created and the previous one rendered inactive.

DepositParams

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/gov.proto#L152-L162

VotingParams

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/gov.proto#L164-L168

TallyParams

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/gov.proto#L170-L182

Parameters are stored in a global GlobalParams KVStore.

Additionally, we introduce some basic types:

Copy type Vote byte const ( VoteYes = 0x1 VoteNo = 0x2 VoteNoWithVeto = 0x3 VoteAbstain = 0x4 ) type ProposalType string const ( ProposalTypePlainText = "Text" ProposalTypeSoftwareUpgrade = "SoftwareUpgrade" ) type ProposalStatus byte const ( StatusNil ProposalStatus = 0x00 StatusDepositPeriod ProposalStatus = 0x01 // Proposal is submitted. Participants can deposit on it but not vote StatusVotingPeriod ProposalStatus = 0x02 // MinDeposit is reached, participants can vote StatusPassed ProposalStatus = 0x03 // Proposal passed and successfully executed StatusRejected ProposalStatus = 0x04 // Proposal has been rejected StatusFailed ProposalStatus = 0x05 // Proposal passed but failed execution )

State: Deposit

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/gov.proto#L38-L49

State: ValidatorGovInfo

This type is used in a temp map when tallying

Copy type ValidatorGovInfo struct { Minus sdk.Dec Vote Vote }

Stores

:::note Stores are KVStores in the multi-store. The key to find the store is the first parameter in the list :::

We will use one KVStore Governance to store four mappings:

• A mapping from proposalID|'proposal' to Proposal.
• A mapping from proposalID|'addresses'|address to Vote. This mapping allows us to query all addresses that voted on the proposal along with their vote by doing a range query on proposalID:addresses.
• A mapping from ParamsKey|'Params' to Params. This map allows to query all x/gov params.
• A mapping from VotingPeriodProposalKeyPrefix|proposalID to a single byte. This allows us to know if a proposal is in the voting period or not with very low gas cost.

For pseudocode purposes, here are the two function we will use to read or write in stores:

• load(StoreKey, Key): Retrieve item stored at key Key in store found at key StoreKey in the multistore
• store(StoreKey, Key, value): Write value Value at key Key in store found at key StoreKey in the multistore

Proposal Processing Queue

Store:

• ProposalProcessingQueue: A queue queue[proposalID] containing all the ProposalIDs of proposals that reached MinDeposit. During each EndBlock, all the proposals that have reached the end of their voting period are processed. To process a finished proposal, the application tallies the votes, computes the votes of each validator and checks if every validator in the validator set has voted. If the proposal is accepted, deposits are refunded. Finally, the proposal content Handler is executed.

And the pseudocode for the ProposalProcessingQueue:

Copy in EndBlock do for finishedProposalID in GetAllFinishedProposalIDs(block.Time) proposal = load(Governance, <proposalID|'proposal'>) // proposal is a const key validators = Keeper.getAllValidators() tmpValMap := map(sdk.AccAddress)ValidatorGovInfo // Initiate mapping at 0. This is the amount of shares of the validator's vote that will be overridden by their delegator's votes for each validator in validators tmpValMap(validator.OperatorAddr).Minus = 0 // Tally voterIterator = rangeQuery(Governance, <proposalID|'addresses'>) //return all the addresses that voted on the proposal for each (voterAddress, vote) in voterIterator delegations = stakingKeeper.getDelegations(voterAddress) // get all delegations for current voter for each delegation in delegations // make sure delegation.Shares does NOT include shares being unbonded tmpValMap(delegation.ValidatorAddr).Minus += delegation.Shares proposal.updateTally(vote, delegation.Shares) _, isVal = stakingKeeper.getValidator(voterAddress) if (isVal) tmpValMap(voterAddress).Vote = vote tallyingParam = load(GlobalParams, 'TallyingParam') // Update tally if validator voted for each validator in validators if tmpValMap(validator).HasVoted proposal.updateTally(tmpValMap(validator).Vote, (validator.TotalShares - tmpValMap(validator).Minus)) // Check if proposal is accepted or rejected totalNonAbstain := proposal.YesVotes + proposal.NoVotes + proposal.NoWithVetoVotes if (proposal.Votes.YesVotes/totalNonAbstain > tallyingParam.Threshold AND proposal.Votes.NoWithVetoVotes/totalNonAbstain < tallyingParam.Veto) // proposal was accepted at the end of the voting period // refund deposits (non-voters already punished) for each (amount, depositor) in proposal.Deposits depositor.AtomBalance += amount stateWriter, err := proposal.Handler() if err != nil // proposal passed but failed during state execution proposal.CurrentStatus = ProposalStatusFailed else // proposal pass and state is persisted proposal.CurrentStatus = ProposalStatusAccepted stateWriter.save() else // proposal was rejected proposal.CurrentStatus = ProposalStatusRejected store(Governance, <proposalID|'proposal'>, proposal)

Legacy Proposal

A legacy proposal is the old implementation of governance proposal. Contrary to proposal that can contain any messages, a legacy proposal allows to submit a set of pre-defined proposals. These proposal are defined by their types.

While proposals should use the new implementation of the governance proposal, we need still to use legacy proposal in order to submit a software-upgrade and a cancel-software-upgrade proposal.

More information on how to submit proposals in the client section.

Messages

MsgSubmitProposal

Proposals can be submitted by any account via a MsgSubmitProposal transaction.

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/tx.proto#L42-L69

All sdk.Msgs passed into the messages field of a MsgSubmitProposal message must be registered in the app's MsgServiceRouter. Each of these messages must have one signer, namely the gov module account. And finally, the metadata length must not be larger than the maxMetadataLen config passed into the gov keeper.

State modifications:

• Generate new proposalID
• Create new Proposal
• Initialise Proposal's attributes
• Decrease balance of sender by InitialDeposit
• If MinDeposit is reached:
  • Push proposalID in ProposalProcessingQueue
• Transfer InitialDeposit from the Proposer to the governance ModuleAccount

A MsgSubmitProposal transaction can be handled according to the following pseudocode.

Copy // PSEUDOCODE // // Check if MsgSubmitProposal is valid. If it is, create proposal // upon receiving txGovSubmitProposal from sender do if !correctlyFormatted(txGovSubmitProposal) // check if proposal is correctly formatted and the messages have routes to other modules. Includes fee payment. // check if all messages' unique Signer is the gov acct. // check if the metadata is not too long. throw initialDeposit = txGovSubmitProposal.InitialDeposit if (initialDeposit.Atoms <= 0) OR (sender.AtomBalance < initialDeposit.Atoms) // InitialDeposit is negative or null OR sender has insufficient funds throw if (txGovSubmitProposal.Type != ProposalTypePlainText) OR (txGovSubmitProposal.Type != ProposalTypeSoftwareUpgrade) sender.AtomBalance -= initialDeposit.Atoms depositParam = load(GlobalParams, 'DepositParam') proposalID = generate new proposalID proposal = NewProposal() proposal.Messages = txGovSubmitProposal.Messages proposal.Metadata = txGovSubmitProposal.Metadata proposal.TotalDeposit = initialDeposit proposal.SubmitTime = <CurrentTime> proposal.DepositEndTime = <CurrentTime>.Add(depositParam.MaxDepositPeriod) proposal.Deposits.append({initialDeposit, sender}) proposal.Submitter = sender proposal.YesVotes = 0 proposal.NoVotes = 0 proposal.NoWithVetoVotes = 0 proposal.AbstainVotes = 0 proposal.CurrentStatus = ProposalStatusOpen store(Proposals, <proposalID|'proposal'>, proposal) // Store proposal in Proposals mapping return proposalID

MsgDeposit

Once a proposal is submitted, if Proposal.TotalDeposit < ActiveParam.MinDeposit, Atom holders can send MsgDeposit transactions to increase the proposal's deposit.

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/tx.proto#L134-L147

State modifications:

• Decrease balance of sender by deposit
• Add deposit of sender in proposal.Deposits
• Increase proposal.TotalDeposit by sender's deposit
• If MinDeposit is reached:
  • Push proposalID in ProposalProcessingQueueEnd
• Transfer Deposit from the proposer to the governance ModuleAccount

A MsgDeposit transaction has to go through a number of checks to be valid. These checks are outlined in the following pseudocode.

Copy // PSEUDOCODE // // Check if MsgDeposit is valid. If it is, increase deposit and check if MinDeposit is reached upon receiving txGovDeposit from sender do // check if proposal is correctly formatted. Includes fee payment. if !correctlyFormatted(txGovDeposit) throw proposal = load(Proposals, <txGovDeposit.ProposalID|'proposal'>) // proposal is a const key, proposalID is variable if (proposal == nil) // There is no proposal for this proposalID throw if (txGovDeposit.Deposit.Atoms <= 0) OR (sender.AtomBalance < txGovDeposit.Deposit.Atoms) OR (proposal.CurrentStatus != ProposalStatusOpen) // deposit is negative or null // OR sender has insufficient funds // OR proposal is not open for deposit anymore throw depositParam = load(GlobalParams, 'DepositParam') if (CurrentBlock >= proposal.SubmitBlock + depositParam.MaxDepositPeriod) proposal.CurrentStatus = ProposalStatusClosed else // sender can deposit sender.AtomBalance -= txGovDeposit.Deposit.Atoms proposal.Deposits.append({txGovVote.Deposit, sender}) proposal.TotalDeposit.Plus(txGovDeposit.Deposit) if (proposal.TotalDeposit >= depositParam.MinDeposit) // MinDeposit is reached, vote opens proposal.VotingStartBlock = CurrentBlock proposal.CurrentStatus = ProposalStatusActive ProposalProcessingQueue.push(txGovDeposit.ProposalID) store(Proposals, <txGovVote.ProposalID|'proposal'>, proposal)

MsgVote

Once ActiveParam.MinDeposit is reached, voting period starts. From there, bonded Atom holders are able to send MsgVote transactions to cast their vote on the proposal.

Copy https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/proto/cosmos/gov/v1/tx.proto#L92-L108

State modifications:

• Record Vote of sender

:::note Gas cost for this message has to take into account the future tallying of the vote in EndBlocker. :::

Next is a pseudocode outline of the way MsgVote transactions are handled:

Copy // PSEUDOCODE // // Check if MsgVote is valid. If it is, count vote// upon receiving txGovVote from sender do // check if proposal is correctly formatted. Includes fee payment. if !correctlyFormatted(txGovDeposit) throw proposal = load(Proposals, <txGovDeposit.ProposalID|'proposal'>) if (proposal == nil) // There is no proposal for this proposalID throw if (proposal.CurrentStatus == ProposalStatusActive) // Sender can vote if // Proposal is active // Sender has some bonds store(Governance, <txGovVote.ProposalID|'addresses'|sender>, txGovVote.Vote) // Voters can vote multiple times. Re-voting overrides previous vote. This is ok because tallying is done once at the end.

Events

The governance module emits the following events:

EndBlocker

Type	Attribute Key	Attribute Value
inactive_proposal	proposal_id
inactive_proposal	proposal_result
active_proposal	proposal_id
active_proposal	proposal_result

Handlers

MsgSubmitProposal

Type	Attribute Key	Attribute Value
submit_proposal	proposal_id
submit_proposal [0]	voting_period_start
proposal_deposit	amount
proposal_deposit	proposal_id
message	module	governance
message	action	submit_proposal
message	sender

• [0] Event only emitted if the voting period starts during the submission.

MsgVote

Type	Attribute Key	Attribute Value
proposal_vote	option
proposal_vote	proposal_id
message	module	governance
message	action	vote
message	sender

MsgVoteWeighted

Type	Attribute Key	Attribute Value
proposal_vote	option
proposal_vote	proposal_id
message	module	governance
message	action	vote
message	sender

MsgDeposit

Type	Attribute Key	Attribute Value
proposal_deposit	amount
proposal_deposit	proposal_id
proposal_deposit [0]	voting_period_start
message	module	governance
message	action	deposit
message	sender

• [0] Event only emitted if the voting period starts during the submission.

Parameters

The governance module contains the following parameters:

Key	Type	Example
min_deposit	array (coins)	[{"denom":"unibi","amount":"10000000"}]
max_deposit_period	string (time ns)	"172800000000000" (17280s)
voting_period	string (time ns)	"172800000000000" (17280s)
quorum	string (dec)	"0.334000000000000000"
threshold	string (dec)	"0.500000000000000000"
veto	string (dec)	"0.334000000000000000"
burn_proposal_deposit_prevote	bool	false
burn_vote_quorum	bool	false
burn_vote_veto	bool	true

NOTE: The governance module contains parameters that are objects unlike other modules. If only a subset of parameters are desired to be changed, only they need to be included and not the entire parameter object structure.

Client

CLI

A user can query and interact with the gov module using the CLI.

Query

The query commands allow users to query gov state.

Copy nibid query gov --help

deposit

The deposit command allows users to query a deposit for a given proposal from a given depositor.

Copy nibid query gov deposit [proposal-id] [depositer-addr] [flags]

Example:

Copy nibid query gov deposit 1 cosmos1..

Example Output:

Copy amount: - amount: "100" denom: stake depositor: cosmos1.. proposal_id: "1"

deposits

The deposits command allows users to query all deposits for a given proposal.

Copy nibid query gov deposits [proposal-id] [flags]

Example:

Copy nibid query gov deposits 1

Example Output:

Copy deposits: - amount: - amount: "100" denom: stake depositor: cosmos1.. proposal_id: "1" pagination: next_key: null total: "0"

param

The param command allows users to query a given parameter for the gov module.

Copy nibid query gov param [param-type] [flags]

Example:

Copy nibid query gov param voting

Example Output:

Copy voting_period: "172800000000000"

params

The params command allows users to query all parameters for the gov module.

Copy nibid query gov params [flags]

Example:

Copy nibid query gov params

Example Output:

Copy deposit_params: max_deposit_period: "172800000000000" min_deposit: - amount: "10000000" denom: stake tally_params: quorum: "0.334000000000000000" threshold: "0.500000000000000000" veto_threshold: "0.334000000000000000" voting_params: voting_period: "172800000000000"

proposal

The proposal command allows users to query a given proposal.

Copy nibid query gov proposal [proposal-id] [flags]

Example:

Copy nibid query gov proposal 1

Example Output:

Copy deposit_end_time: "2022-03-30T11:50:20.819676256Z" final_tally_result: abstain_count: "0" no_count: "0" no_with_veto_count: "0" yes_count: "0" id: "1" messages: - '@type': /cosmos.bank.v1beta1.MsgSend amount: - amount: "10" denom: stake from_address: cosmos1.. to_address: cosmos1.. metadata: AQ== status: PROPOSAL_STATUS_DEPOSIT_PERIOD submit_time: "2022-03-28T11:50:20.819676256Z" total_deposit: - amount: "10" denom: stake voting_end_time: null voting_start_time: null

proposals

The proposals command allows users to query all proposals with optional filters.

Copy nibid query gov proposals [flags]

Example:

Copy nibid query gov proposals

Example Output:

Copy pagination: next_key: null total: "0" proposals: - deposit_end_time: "2022-03-30T11:50:20.819676256Z" final_tally_result: abstain_count: "0" no_count: "0" no_with_veto_count: "0" yes_count: "0" id: "1" messages: - '@type': /cosmos.bank.v1beta1.MsgSend amount: - amount: "10" denom: stake from_address: cosmos1.. to_address: cosmos1.. metadata: AQ== status: PROPOSAL_STATUS_DEPOSIT_PERIOD submit_time: "2022-03-28T11:50:20.819676256Z" total_deposit: - amount: "10" denom: stake voting_end_time: null voting_start_time: null - deposit_end_time: "2022-03-30T14:02:41.165025015Z" final_tally_result: abstain_count: "0" no_count: "0" no_with_veto_count: "0" yes_count: "0" id: "2" messages: - '@type': /cosmos.bank.v1beta1.MsgSend amount: - amount: "10" denom: stake from_address: cosmos1.. to_address: cosmos1.. metadata: AQ== status: PROPOSAL_STATUS_DEPOSIT_PERIOD submit_time: "2022-03-28T14:02:41.165025015Z" total_deposit: - amount: "10" denom: stake voting_end_time: null voting_start_time: null

proposer

The proposer command allows users to query the proposer for a given proposal.

Copy nibid query gov proposer [proposal-id] [flags]

Example:

Copy nibid query gov proposer 1

Example Output:

Copy proposal_id: "1" proposer: cosmos1..

tally

The tally command allows users to query the tally of a given proposal vote.

Copy nibid query gov tally [proposal-id] [flags]

Example:

Copy nibid query gov tally 1

Example Output:

Copy abstain: "0" "no": "0" no_with_veto: "0" "yes": "1"

vote

The vote command allows users to query a vote for a given proposal.

Copy nibid query gov vote [proposal-id] [voter-addr] [flags]

Example:

Copy nibid query gov vote 1 cosmos1..

Example Output:

Copy option: VOTE_OPTION_YES options: - option: VOTE_OPTION_YES weight: "1.000000000000000000" proposal_id: "1" voter: cosmos1..

votes

The votes command allows users to query all votes for a given proposal.

Copy nibid query gov votes [proposal-id] [flags]

Example:

Copy nibid query gov votes 1

Example Output:

Copy pagination: next_key: null total: "0" votes: - option: VOTE_OPTION_YES options: - option: VOTE_OPTION_YES weight: "1.000000000000000000" proposal_id: "1" voter: cosmos1..

Transactions

The tx commands allow users to interact with the gov module.

Copy nibid tx gov --help

deposit

The deposit command allows users to deposit tokens for a given proposal.

Copy nibid tx gov deposit [proposal-id] [deposit] [flags]

Example:

Copy nibid tx gov deposit 1 10000000stake --from nibi1..

draft-proposal

The draft-proposal command allows users to draft any type of proposal. The command returns a draft_proposal.json, to be used by submit-proposal after being completed. The draft_metadata.json is meant to be uploaded to IPFS.

Copy nibid tx gov draft-proposal

submit-proposal

The submit-proposal command allows users to submit a governance proposal along with some messages and metadata. Messages, metadata and deposit are defined in a JSON file.

Copy nibid tx gov submit-proposal [path-to-proposal-json] [flags]

Example:

Copy nibid tx gov submit-proposal /path/to/proposal.json --from nibi1..

where proposal.json contains:

Copy { "messages": [ { "@type": "/cosmos.bank.v1beta1.MsgSend", "from_address": "cosmos1...", // The gov module module address "to_address": "cosmos1...", "amount":[{"denom": "stake","amount": "10"}] } ], "metadata": "AQ==", "deposit": "10stake", "title": "Proposal Title", "summary": "Proposal Summary" }

:::note By default the metadata, summary and title are both limited by 255 characters, this can be overridden by the application developer. :::

submit-legacy-proposal

The submit-legacy-proposal command allows users to submit a governance legacy proposal along with an initial deposit.

Copy nibid tx gov submit-legacy-proposal [command] [flags]

Example:

Copy nibid tx gov submit-legacy-proposal --title="Test Proposal" --description="testing" --type="Text" --deposit="100000000stake" --from nibi1..

Example (cancel-software-upgrade):

Copy nibid tx gov submit-legacy-proposal cancel-software-upgrade --title="Test Proposal" --description="testing" --deposit="100000000stake" --from nibi1..

Example (community-pool-spend):

Copy nibid tx gov submit-legacy-proposal community-pool-spend proposal.json --from nibi1.. Copy { "title": "Test Proposal", "description": "testing, 1, 2, 3", "recipient": "cosmos1..", "amount": "10000000stake", "deposit": "10000000stake" }

Example (param-change):

Copy nibid tx gov submit-legacy-proposal param-change proposal.json --from nibi1.. Copy { "title": "Test Proposal", "description": "testing, testing, 1, 2, 3", "changes": [ { "subspace": "staking", "key": "MaxValidators", "value": 100 } ], "deposit": "10000000stake" }

Example (software-upgrade):

Copy nibid tx gov submit-legacy-proposal software-upgrade v2 --title="Test Proposal" --description="testing, testing, 1, 2, 3" --upgrade-height 1000000 --from nibi1..

vote

The vote command allows users to submit a vote for a given governance proposal.

Copy nibid tx gov vote [command] [flags]

Example:

Copy nibid tx gov vote 1 yes --from nibi1..

weighted-vote

The weighted-vote command allows users to submit a weighted vote for a given governance proposal.

Copy nibid tx gov weighted-vote [proposal-id] [weighted-options] [flags]

Example:

Copy nibid tx gov weighted-vote 1 yes=0.5,no=0.5 --from nibi1..

gRPC

A user can query the gov module using gRPC endpoints.

Proposal

The Proposal endpoint allows users to query a given proposal.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/Proposal

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1beta1.Query/Proposal

Example Output:

Copy { "proposal": { "proposalId": "1", "content": {"@type":"/cosmos.gov.v1beta1.TextProposal","description":"testing, testing, 1, 2, 3","title":"Test Proposal"}, "status": "PROPOSAL_STATUS_VOTING_PERIOD", "finalTallyResult": { "yes": "0", "abstain": "0", "no": "0", "noWithVeto": "0" }, "submitTime": "2021-09-16T19:40:08.712440474Z", "depositEndTime": "2021-09-18T19:40:08.712440474Z", "totalDeposit": [ { "denom": "stake", "amount": "10000000" } ], "votingStartTime": "2021-09-16T19:40:08.712440474Z", "votingEndTime": "2021-09-18T19:40:08.712440474Z", "title": "Test Proposal", "summary": "testing, testing, 1, 2, 3" } }

Using v1:

Copy cosmos.gov.v1.Query/Proposal

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1.Query/Proposal

Example Output:

Copy { "proposal": { "id": "1", "messages": [ {"@type":"/cosmos.bank.v1beta1.MsgSend","amount":[{"denom":"stake","amount":"10"}],"fromAddress":"cosmos1..","toAddress":"cosmos1.."} ], "status": "PROPOSAL_STATUS_VOTING_PERIOD", "finalTallyResult": { "yesCount": "0", "abstainCount": "0", "noCount": "0", "noWithVetoCount": "0" }, "submitTime": "2022-03-28T11:50:20.819676256Z", "depositEndTime": "2022-03-30T11:50:20.819676256Z", "totalDeposit": [ { "denom": "stake", "amount": "10000000" } ], "votingStartTime": "2022-03-28T14:25:26.644857113Z", "votingEndTime": "2022-03-30T14:25:26.644857113Z", "metadata": "AQ==", "title": "Test Proposal", "summary": "testing, testing, 1, 2, 3" } }

Proposals

The Proposals endpoint allows users to query all proposals with optional filters.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/Proposals

Example:

Copy grpcurl -plaintext \ localhost:9090 \ cosmos.gov.v1beta1.Query/Proposals

Example Output:

Copy { "proposals": [ { "proposalId": "1", "status": "PROPOSAL_STATUS_VOTING_PERIOD", "finalTallyResult": { "yes": "0", "abstain": "0", "no": "0", "noWithVeto": "0" }, "submitTime": "2022-03-28T11:50:20.819676256Z", "depositEndTime": "2022-03-30T11:50:20.819676256Z", "totalDeposit": [ { "denom": "stake", "amount": "10000000010" } ], "votingStartTime": "2022-03-28T14:25:26.644857113Z", "votingEndTime": "2022-03-30T14:25:26.644857113Z" }, { "proposalId": "2", "status": "PROPOSAL_STATUS_DEPOSIT_PERIOD", "finalTallyResult": { "yes": "0", "abstain": "0", "no": "0", "noWithVeto": "0" }, "submitTime": "2022-03-28T14:02:41.165025015Z", "depositEndTime": "2022-03-30T14:02:41.165025015Z", "totalDeposit": [ { "denom": "stake", "amount": "10" } ], "votingStartTime": "0001-01-01T00:00:00Z", "votingEndTime": "0001-01-01T00:00:00Z" } ], "pagination": { "total": "2" } }

Using v1:

Copy cosmos.gov.v1.Query/Proposals

Example:

Copy grpcurl -plaintext \ localhost:9090 \ cosmos.gov.v1.Query/Proposals

Example Output:

Copy { "proposals": [ { "id": "1", "messages": [ {"@type":"/cosmos.bank.v1beta1.MsgSend","amount":[{"denom":"stake","amount":"10"}],"fromAddress":"cosmos1..","toAddress":"cosmos1.."} ], "status": "PROPOSAL_STATUS_VOTING_PERIOD", "finalTallyResult": { "yesCount": "0", "abstainCount": "0", "noCount": "0", "noWithVetoCount": "0" }, "submitTime": "2022-03-28T11:50:20.819676256Z", "depositEndTime": "2022-03-30T11:50:20.819676256Z", "totalDeposit": [ { "denom": "stake", "amount": "10000000010" } ], "votingStartTime": "2022-03-28T14:25:26.644857113Z", "votingEndTime": "2022-03-30T14:25:26.644857113Z", "metadata": "AQ==", "title": "Proposal Title", "summary": "Proposal Summary" }, { "id": "2", "messages": [ {"@type":"/cosmos.bank.v1beta1.MsgSend","amount":[{"denom":"stake","amount":"10"}],"fromAddress":"cosmos1..","toAddress":"cosmos1.."} ], "status": "PROPOSAL_STATUS_DEPOSIT_PERIOD", "finalTallyResult": { "yesCount": "0", "abstainCount": "0", "noCount": "0", "noWithVetoCount": "0" }, "submitTime": "2022-03-28T14:02:41.165025015Z", "depositEndTime": "2022-03-30T14:02:41.165025015Z", "totalDeposit": [ { "denom": "stake", "amount": "10" } ], "metadata": "AQ==", "title": "Proposal Title", "summary": "Proposal Summary" } ], "pagination": { "total": "2" } }

Vote

The Vote endpoint allows users to query a vote for a given proposal.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/Vote

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1","voter":"cosmos1.."}' \ localhost:9090 \ cosmos.gov.v1beta1.Query/Vote

Example Output:

Copy { "vote": { "proposalId": "1", "voter": "cosmos1..", "option": "VOTE_OPTION_YES", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1000000000000000000" } ] } }

Using v1:

Copy cosmos.gov.v1.Query/Vote

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1","voter":"cosmos1.."}' \ localhost:9090 \ cosmos.gov.v1.Query/Vote

Example Output:

Copy { "vote": { "proposalId": "1", "voter": "cosmos1..", "option": "VOTE_OPTION_YES", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1.000000000000000000" } ] } }

Votes

The Votes endpoint allows users to query all votes for a given proposal.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/Votes

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1beta1.Query/Votes

Example Output:

Copy { "votes": [ { "proposalId": "1", "voter": "cosmos1..", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1000000000000000000" } ] } ], "pagination": { "total": "1" } }

Using v1:

Copy cosmos.gov.v1.Query/Votes

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1.Query/Votes

Example Output:

Copy { "votes": [ { "proposalId": "1", "voter": "cosmos1..", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1.000000000000000000" } ] } ], "pagination": { "total": "1" } }

Params

The Params endpoint allows users to query all parameters for the gov module.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/Params

Example:

Copy grpcurl -plaintext \ -d '{"params_type":"voting"}' \ localhost:9090 \ cosmos.gov.v1beta1.Query/Params

Example Output:

Copy { "votingParams": { "votingPeriod": "172800s" }, "depositParams": { "maxDepositPeriod": "0s" }, "tallyParams": { "quorum": "MA==", "threshold": "MA==", "vetoThreshold": "MA==" } }

Using v1:

Copy cosmos.gov.v1.Query/Params

Example:

Copy grpcurl -plaintext \ -d '{"params_type":"voting"}' \ localhost:9090 \ cosmos.gov.v1.Query/Params

Example Output:

Copy { "votingParams": { "votingPeriod": "172800s" } }

Deposit

The Deposit endpoint allows users to query a deposit for a given proposal from a given depositor.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/Deposit

Example:

Copy grpcurl -plaintext \ '{"proposal_id":"1","depositor":"cosmos1.."}' \ localhost:9090 \ cosmos.gov.v1beta1.Query/Deposit

Example Output:

Copy { "deposit": { "proposalId": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } }

Using v1:

Copy cosmos.gov.v1.Query/Deposit

Example:

Copy grpcurl -plaintext \ '{"proposal_id":"1","depositor":"cosmos1.."}' \ localhost:9090 \ cosmos.gov.v1.Query/Deposit

Example Output:

Copy { "deposit": { "proposalId": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } }

deposits

The Deposits endpoint allows users to query all deposits for a given proposal.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/Deposits

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1beta1.Query/Deposits

Example Output:

Copy { "deposits": [ { "proposalId": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } ], "pagination": { "total": "1" } }

Using v1:

Copy cosmos.gov.v1.Query/Deposits

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1.Query/Deposits

Example Output:

Copy { "deposits": [ { "proposalId": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } ], "pagination": { "total": "1" } }

TallyResult

The TallyResult endpoint allows users to query the tally of a given proposal.

Using legacy v1beta1:

Copy cosmos.gov.v1beta1.Query/TallyResult

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1beta1.Query/TallyResult

Example Output:

Copy { "tally": { "yes": "1000000", "abstain": "0", "no": "0", "noWithVeto": "0" } }

Using v1:

Copy cosmos.gov.v1.Query/TallyResult

Example:

Copy grpcurl -plaintext \ -d '{"proposal_id":"1"}' \ localhost:9090 \ cosmos.gov.v1.Query/TallyResult

Example Output:

Copy { "tally": { "yes": "1000000", "abstain": "0", "no": "0", "noWithVeto": "0" } }

REST

A user can query the gov module using REST endpoints.

proposal

The proposals endpoint allows users to query a given proposal.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/proposals/{proposal_id}

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/proposals/1

Example Output:

Copy { "proposal": { "proposal_id": "1", "content": null, "status": "PROPOSAL_STATUS_VOTING_PERIOD", "final_tally_result": { "yes": "0", "abstain": "0", "no": "0", "no_with_veto": "0" }, "submit_time": "2022-03-28T11:50:20.819676256Z", "deposit_end_time": "2022-03-30T11:50:20.819676256Z", "total_deposit": [ { "denom": "stake", "amount": "10000000010" } ], "voting_start_time": "2022-03-28T14:25:26.644857113Z", "voting_end_time": "2022-03-30T14:25:26.644857113Z" } }

Using v1:

Copy /cosmos/gov/v1/proposals/{proposal_id}

Example:

Copy curl localhost:1317/cosmos/gov/v1/proposals/1

Example Output:

Copy { "proposal": { "id": "1", "messages": [ { "@type": "/cosmos.bank.v1beta1.MsgSend", "from_address": "cosmos1..", "to_address": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10" } ] } ], "status": "PROPOSAL_STATUS_VOTING_PERIOD", "final_tally_result": { "yes_count": "0", "abstain_count": "0", "no_count": "0", "no_with_veto_count": "0" }, "submit_time": "2022-03-28T11:50:20.819676256Z", "deposit_end_time": "2022-03-30T11:50:20.819676256Z", "total_deposit": [ { "denom": "stake", "amount": "10000000" } ], "voting_start_time": "2022-03-28T14:25:26.644857113Z", "voting_end_time": "2022-03-30T14:25:26.644857113Z", "metadata": "AQ==", "title": "Proposal Title", "summary": "Proposal Summary" } }

proposals

The proposals endpoint also allows users to query all proposals with optional filters.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/proposals

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/proposals

Example Output:

Copy { "proposals": [ { "proposal_id": "1", "content": null, "status": "PROPOSAL_STATUS_VOTING_PERIOD", "final_tally_result": { "yes": "0", "abstain": "0", "no": "0", "no_with_veto": "0" }, "submit_time": "2022-03-28T11:50:20.819676256Z", "deposit_end_time": "2022-03-30T11:50:20.819676256Z", "total_deposit": [ { "denom": "stake", "amount": "10000000" } ], "voting_start_time": "2022-03-28T14:25:26.644857113Z", "voting_end_time": "2022-03-30T14:25:26.644857113Z" }, { "proposal_id": "2", "content": null, "status": "PROPOSAL_STATUS_DEPOSIT_PERIOD", "final_tally_result": { "yes": "0", "abstain": "0", "no": "0", "no_with_veto": "0" }, "submit_time": "2022-03-28T14:02:41.165025015Z", "deposit_end_time": "2022-03-30T14:02:41.165025015Z", "total_deposit": [ { "denom": "stake", "amount": "10" } ], "voting_start_time": "0001-01-01T00:00:00Z", "voting_end_time": "0001-01-01T00:00:00Z" } ], "pagination": { "next_key": null, "total": "2" } }

Using v1:

Copy /cosmos/gov/v1/proposals

Example:

Copy curl localhost:1317/cosmos/gov/v1/proposals

Example Output:

Copy { "proposals": [ { "id": "1", "messages": [ { "@type": "/cosmos.bank.v1beta1.MsgSend", "from_address": "cosmos1..", "to_address": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10" } ] } ], "status": "PROPOSAL_STATUS_VOTING_PERIOD", "final_tally_result": { "yes_count": "0", "abstain_count": "0", "no_count": "0", "no_with_veto_count": "0" }, "submit_time": "2022-03-28T11:50:20.819676256Z", "deposit_end_time": "2022-03-30T11:50:20.819676256Z", "total_deposit": [ { "denom": "stake", "amount": "10000000010" } ], "voting_start_time": "2022-03-28T14:25:26.644857113Z", "voting_end_time": "2022-03-30T14:25:26.644857113Z", "metadata": "AQ==", "title": "Proposal Title", "summary": "Proposal Summary" }, { "id": "2", "messages": [ { "@type": "/cosmos.bank.v1beta1.MsgSend", "from_address": "cosmos1..", "to_address": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10" } ] } ], "status": "PROPOSAL_STATUS_DEPOSIT_PERIOD", "final_tally_result": { "yes_count": "0", "abstain_count": "0", "no_count": "0", "no_with_veto_count": "0" }, "submit_time": "2022-03-28T14:02:41.165025015Z", "deposit_end_time": "2022-03-30T14:02:41.165025015Z", "total_deposit": [ { "denom": "stake", "amount": "10" } ], "voting_start_time": null, "voting_end_time": null, "metadata": "AQ==", "title": "Proposal Title", "summary": "Proposal Summary" } ], "pagination": { "next_key": null, "total": "2" } }

voter vote

The votes endpoint allows users to query a vote for a given proposal.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/proposals/{proposal_id}/votes/{voter}

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/proposals/1/votes/cosmos1..

Example Output:

Copy { "vote": { "proposal_id": "1", "voter": "cosmos1..", "option": "VOTE_OPTION_YES", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1.000000000000000000" } ] } }

Using v1:

Copy /cosmos/gov/v1/proposals/{proposal_id}/votes/{voter}

Example:

Copy curl localhost:1317/cosmos/gov/v1/proposals/1/votes/cosmos1..

Example Output:

Copy { "vote": { "proposal_id": "1", "voter": "cosmos1..", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1.000000000000000000" } ], "metadata": "" } }

votes

The votes endpoint allows users to query all votes for a given proposal.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/proposals/{proposal_id}/votes

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/proposals/1/votes

Example Output:

Copy { "votes": [ { "proposal_id": "1", "voter": "cosmos1..", "option": "VOTE_OPTION_YES", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1.000000000000000000" } ] } ], "pagination": { "next_key": null, "total": "1" } }

Using v1:

Copy /cosmos/gov/v1/proposals/{proposal_id}/votes

Example:

Copy curl localhost:1317/cosmos/gov/v1/proposals/1/votes

Example Output:

Copy { "votes": [ { "proposal_id": "1", "voter": "cosmos1..", "options": [ { "option": "VOTE_OPTION_YES", "weight": "1.000000000000000000" } ], "metadata": "" } ], "pagination": { "next_key": null, "total": "1" } }

params

The params endpoint allows users to query all parameters for the gov module.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/params/{params_type}

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/params/voting

Example Output:

Copy { "voting_params": { "voting_period": "172800s" }, "deposit_params": { "min_deposit": [ ], "max_deposit_period": "0s" }, "tally_params": { "quorum": "0.000000000000000000", "threshold": "0.000000000000000000", "veto_threshold": "0.000000000000000000" } }

Using v1:

Copy /cosmos/gov/v1/params/{params_type}

Example:

Copy curl localhost:1317/cosmos/gov/v1/params/voting

Example Output:

Copy { "voting_params": { "voting_period": "172800s" }, "deposit_params": { "min_deposit": [ ], "max_deposit_period": "0s" }, "tally_params": { "quorum": "0.000000000000000000", "threshold": "0.000000000000000000", "veto_threshold": "0.000000000000000000" } }

deposits

The deposits endpoint allows users to query a deposit for a given proposal from a given depositor.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/proposals/{proposal_id}/deposits/{depositor}

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/proposals/1/deposits/cosmos1..

Example Output:

Copy { "deposit": { "proposal_id": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } }

Using v1:

Copy /cosmos/gov/v1/proposals/{proposal_id}/deposits/{depositor}

Example:

Copy curl localhost:1317/cosmos/gov/v1/proposals/1/deposits/cosmos1..

Example Output:

Copy { "deposit": { "proposal_id": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } }

proposal deposits

The deposits endpoint allows users to query all deposits for a given proposal.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/proposals/{proposal_id}/deposits

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/proposals/1/deposits

Example Output:

Copy { "deposits": [ { "proposal_id": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } ], "pagination": { "next_key": null, "total": "1" } }

Using v1:

Copy /cosmos/gov/v1/proposals/{proposal_id}/deposits

Example:

Copy curl localhost:1317/cosmos/gov/v1/proposals/1/deposits

Example Output:

Copy { "deposits": [ { "proposal_id": "1", "depositor": "cosmos1..", "amount": [ { "denom": "stake", "amount": "10000000" } ] } ], "pagination": { "next_key": null, "total": "1" } }

tally

The tally endpoint allows users to query the tally of a given proposal.

Using legacy v1beta1:

Copy /cosmos/gov/v1beta1/proposals/{proposal_id}/tally

Example:

Copy curl localhost:1317/cosmos/gov/v1beta1/proposals/1/tally

Example Output:

Copy { "tally": { "yes": "1000000", "abstain": "0", "no": "0", "no_with_veto": "0" } }

Using v1:

Copy /cosmos/gov/v1/proposals/{proposal_id}/tally

Example:

Copy curl localhost:1317/cosmos/gov/v1/proposals/1/tally

Example Output:

Copy { "tally": { "yes": "1000000", "abstain": "0", "no": "0", "no_with_veto": "0" } }

Metadata

The gov module has two locations for metadata where users can provide further context about the on-chain actions they are taking. By default all metadata fields have a 255 character length field where metadata can be stored in json format, either on-chain or off-chain depending on the amount of data required. Here we provide a recommendation for the json structure and where the data should be stored. There are two important factors in making these recommendations. First, that the gov and group modules are consistent with one another, note the number of proposals made by all groups may be quite large. Second, that client applications such as block explorers and governance interfaces have confidence in the consistency of metadata structure accross chains.

Proposal

Location: off-chain as json object stored on IPFS (mirrors group proposal)

Copy { "title": "", "authors": [""], "summary": "", "details": "", "proposal_forum_url": "", "vote_option_context": "", }

:::note The authors field is an array of strings, this is to allow for multiple authors to be listed in the metadata. In v0.46, the authors field is a comma-separated string. Frontends are encouraged to support both formats for backwards compatibility. :::

Vote

Location: on-chain as json within 255 character limit (mirrors group vote)

Copy { "justification": "", }

Future Improvements

The current documentation only describes the minimum viable product for the governance module. Future improvements may include:

• BountyProposals: If accepted, a BountyProposal creates an open bounty. The BountyProposal specifies how many Atoms will be given upon completion. These Atoms will be taken from the reserve pool. After a BountyProposal is accepted by governance, anybody can submit a SoftwareUpgradeProposal with the code to claim the bounty. Note that once a BountyProposal is accepted, the corresponding funds in the reserve pool are locked so that payment can always be honored. In order to link a SoftwareUpgradeProposal to an open bounty, the submitter of the SoftwareUpgradeProposal will use the Proposal.LinkedProposal attribute. If a SoftwareUpgradeProposal linked to an open bounty is accepted by governance, the funds that were reserved are automatically transferred to the submitter.
• Complex delegation: Delegators could choose other representatives than their validators. Ultimately, the chain of representatives would always end up to a validator, but delegators could inherit the vote of their chosen representative before they inherit the vote of their validator. In other words, they would only inherit the vote of their validator if their other appointed representative did not vote.
• Better process for proposal review: There would be two parts to proposal.Deposit, one for anti-spam (same as in MVP) and an other one to reward third party auditors.